Classroom activity · Physics

Seesaw balance and torque classroom activity

Written by Jogeswara, Founder and Engineer, MSc, PMP — Tool CornerFigures checked against the live simulator

Name: ______________________   Date: ______________

How can a small child balance an adult on a seesaw? Not by weight alone. Use the Seesaw Balance and Torque Simulator to find the rule; allow about 20 minutes.

What you will learn

Step 1: predict first

Step 2: find the balance distance

Keep the left side at 25 kg and 1.80 m. For each right-hand mass the panel gives the balance distance, right: how far from the pivot that mass must sit for the beam to level.

Record the balance distance (left side 25 kg at 1.80 m)
Right-hand massSettings (right distance 1.0 m)Balance distance (m)
25 kgOpen 
50 kgOpen 
70 kgOpen 
90 kgOpen 

Step 3: predict, then test

Work out each moment (mass × 9.81 × distance) by hand first. Then open the settings and compare your answer with the panel.

Predict which side goes down
CaseLeft sideRight sideSettingsLeft moment (N·m)Right moment (N·m)Which way?
A40 kg at 1.5 m60 kg at 1.0 mOpen   
B30 kg at 2.0 m50 kg at 1.1 mOpen   

Questions

Teacher answer key

This section does not print. Every figure below is what the simulator shows for those settings.

Step 2
Right-hand massBalance distance
25 kg1.800 m
50 kg0.900 m
70 kg0.643 m
90 kg0.500 m

Each mass times its balance distance is 45 kg·m, which equals the left side's 25 × 1.8. Balance is when mass × distance is equal on both sides.

Step 3
CaseLeft momentRight momentResult
A588.4 N·m588.4 N·mbalanced
B588.4 N·m539.4 N·m49.0 N·m, left side down

Question 2: the left moment is 441.3 N·m and the right is 411.9 N·m, so the left side goes down; the net torque is 29.4 N·m. The child wins because 25 × 1.8 = 45 is larger than 70 × 0.6 = 42.

Question 3: both moments halve, to 220.6 and 205.9 N·m, and the left side still goes down, by half the margin (14.7 N·m). Scaling both distances by the same factor scales both moments by that factor, so the winning side stays the same.

Question 4: g appears on both sides of the balance condition and cancels, so a seesaw that balances on Earth balances on the Moon. The moments themselves are smaller there, and the tip is slower.

Open the full tool: Seesaw Balance and Torque Simulator. The answer key is for teachers and does not print.

Sources and references

The figures in this sheet were calculated from the formulas on the simulator page and checked against the live simulator.

  1. OpenStax, 10.6 Torque, University Physics Volume 1 (accessed 12 November 2026)
  2. OpenStax, 12.1 Conditions for Static Equilibrium, University Physics Volume 1 (accessed 12 November 2026)
Last updated